manualshive.com logo in svg

ABB GLA131 Series, User Manual

Share
Download
ABB GLA131 Series User Manual Download Page 9

ABB GLA131 Series Microportable Analyzers

User Manual

ABB PROPRIETARY INFORMATION

9

Figure 1: Radiation Labels

These labels are located on the enclosure covering the ICOS cell. The fiber laser is
visible only when the insulated enclosure is removed from the ICOS cell.

Operator Safety

When the case cover is closed and locked into position, the analyzer runs safely,
without risk to the operator. Modifying the analyzer to operate with the case cover
open can injure personnel.

WARNING!

Bypassing the analyzer interlock switch to open the case cover
during analyzer operations can cause serious bodily injury. Even
though the analyzer provides a second layer of protection, such as
a laser cover to prevent the user from the invisible laser beam or
any secondary reflection from the laser on a reflective surface, it is
not recommended to modify the analyzer to operate in an unsafe
condition.

Electrical Hazards

The analyzer poses no electrical hazards. The analyzer components operate at

≤

 6.8

V DC.

Laser Hazards

NOTE

This analyzer is a Class 1 laser product.

Summary of Contents for GLA131 Series





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands