ABB GLA131 Series Microportable Analyzers
User Manual
ABB PROPRIETARY INFORMATION
46
Setup Button
Click Setup on the Control Bar to access the
Setup
screen, which provides
additional configuration and service menus: The Time/Files tab is displayed by
default (see Figure 39).
Figure 39: Setup Screen
Setup
screen menu tabs are:
Time/Files: Set time and file format.
Calibration: Single-point calibration using a known reference standard.
Laser Adjust: Manually fine-tune laser wavelength for goodness of fit (GOF)
if necessary.
MIU: Configure the optional Multi-Port Inlet Unit.
Service: Technicians can check on the analyzer status.
Serial Logger: Change how data reported at the RS-232 port are configured.
Refer to the
Modbus Logger: View the Modbus data stream and analyzer alarm status,
and change certain Modbus settings from the default configuration. Refer
to the
section.
