manualshive.com logo in svg

ABB GLA131 Series, User Manual

Share
Download
ABB GLA131 Series User Manual Download Page 18

ABB GLA131 Series Microportable Analyzers

User Manual

ABB PROPRIETARY INFORMATION

18

Gas Inlet and Outlet

Gas to be measured is connected to the ¼ inch push-connect

IN

 port.

The acceptable inlet gas-pressure range is 0 to 15 psig.

The ¼ inch push-connect OUT port may:

Remain open, expelling non-hazardous gas into the air,

Be routed to a different location or system, or

Be recirculated through an enclosed gas-flux chamber.

Power

The analyzer is operational for up to 3 hours when using the internal battery only.

The battery may be recharged using the AC/DC power supply to the DC power
inlet. This power supply contains a 10 A 32 V DC automotive fuse inside the external
power-input harness.

There is also an optional battery charger (ACC-MICRO-BC) when extra batteries
need to be charged outside the analyzer.

WARNING!

Do not use a battery other than the battery provided by ABB.

Data Interface

USB ports – Used to transfer data to a USB memory device or connect a USB
keyboard and mouse.

Serial port (9 pin D-sub) – For real-time digital measurement output.

Video port (15 pin D-sub) – Connects an external monitor to the analyzer.

MIU port (9 pin D-sub) – For connecting to a Multiport Inlet Unit (optional).
Provided with cable for connection to an MIU data port.

Ethernet port – Connects the analyzer to a local area network (LAN) and
allows access to the data directory using an external computer.

Modbus TCP - For reading analyzer process variables and health status via a
Modbus master using the Modbus TCP version of the protocol.

Summary of Contents for GLA131 Series





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands