manualshive.com logo in svg

ABB GLA131 Series, User Manual

Share
Download
ABB GLA131 Series User Manual Download Page 16

ABB GLA131 Series Microportable Analyzers

User Manual

ABB PROPRIETARY INFORMATION

16

Environmental Requirements

Table 4 defines the environment requirements of the analyzer during operational
and non-operational conditions. Operation outside of these requirements may
cause damage to the analyzer.

Table 4: Environment Requirements

Requirements

Specification

Operational Ambient
Temperature

5 °C to 45 °C (41 °F to 113 °F)

Non-Operational
Temperature

1

4 °C to 50 °C (40 °F to 122 °F)

Relative Humidity

Below the dew point for the area, avoiding
condensation on surfaces

WARNING!

To prevent damage to the analyzer, do not expose the analyzer to,
or use the analyzer in, rain or snow.

CAUTION!

ABB does not endorse operation of any analyzer (including
MicroGuard™) not certified for operation in hazardous locations
continuously in air that contains methane levels higher than the
lower flammability limit (LFL), where LFL for methane in air is 4.4%
or 44,000 ppm.

1 For maximum lithium-ion battery life and safety, the recommended storage temperature is between 4 °C to 25 °C
(40 °F to 77 °F).

Summary of Contents for GLA131 Series





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands