manualshive.com logo in svg

ABB GLA131 Series, User Manual

Share
Download
ABB GLA131 Series User Manual Download Page 4

ABB GLA131 Series Microportable Analyzers

User Manual

ABB PROPRIETARY INFORMATION

4

WARNING!

Using this analyzer in a manner not specified by ABB may result in
damage to the analyzer and render it unsafe to operate.

WARNING!

Service to the analyzer must be performed only by certified
service personnel trained on servicing this analyzer. User
adjustments inside the analyzer are not necessary or
recommended by the manufacturer.

WARNING!

Only authorized persons may open the analyzer cover or perform
internal maintenance. Contact ABB for maintenance instructions
and maintenance kits. Make sure the analyzer is unplugged
before working with the internal components. Failure to do so
may result in damage to the analyzer and electric shock.

Disclaimer

This document contains product specifications and performance statements that
may be in conflict with other ABB published literature, such as product flyers and
product catalogs. All specifications, product characteristics, and performance
statements included in this document are suggested specifications only. In case of
conflict between product characteristics in this document and specifications in the
official ABB product catalogs, the latter takes precedence.

ABB reserves the right to make changes to the specifications of all equipment and
software, and to the contents of this document, without obligation to notify any
person or organization of such changes. Every effort has been made to ensure that
the information contained in this document is current and accurate. Please contact
ABB if you find any error in this document, so we can make appropriate
corrections.

Summary of Contents for GLA131 Series





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands