manualshive.com logo in svg

ABB GLA131 Series, User Manual, Page: 17 / 84

Share
Download
ABB GLA131 Series User Manual Download Page 17

ABB GLA131 Series Microportable Analyzers

User Manual

ABB PROPRIETARY INFORMATION

17

4

Features and Measurement Theory

The analyzer is a cavity-based spectroscopy instrument. The analyzer’s cavity
design enhances the absorption of laser light by the target gas molecule. This
enhancement improves the signal-to-noise ratio over conventional laser sensors
enabling trace gas measurement and sensitive monitoring. The type of gas the
analyzer can measure is based upon the laser wavelength used. There are various
models, each targeting gases that various industries monitor. All measurements
are real-time.

Main Features

The analyzer’s main features are:

Measurement and processing time up to 10 Hz

Reduced data cross-interference

Sensitivity up to ppb

Connection Ports

This section describes the connections shown in Figure 6. These connections vary
from analyzer to analyzer depending on the ordered configuration.

Figure 6: Connection Ports

Summary of Contents for GLA131 Series





















































































Reviews:

No comments