102
CoriolisMaster FCB400, FCH400
CORIOLIS MASS FLOWMETER | OI/FCB400/FCH400-EN REV. E
… 9 Operation
… Parameter descriptions
Menu / parameter
Description
Device Setup / ...Transmitter / ...Units
Unit Massflow Qm
Selection of unit for mass flow.
Refer to
Table 2: Units for mass flow
on page 78.
The selection applies to the display of the current mass flow, and for the parameters related to mass flow such as QmMax
and QmMaxDN.
Unit Mass Totalizer
Selection of unit for the mass counters.
Refer to
Table 6: Units for the mass totalizer
on page 79.
Unit Volumeflow Qv
Selection of unit for volume flow.
Refer to
Table 7: Units for the volume totalizer
on page 79.
The selection applies to the display of the current volume flow and for the parameters related to volume flow such as
QvMax and QvMaxDN.
Unit Vol. Totalizer
Selection of unit for the volume totalizers.
Refer to
Table 7: Units for the volume totalizer
on page 79.
Density
Selection of unit for the density.
Refer to
Table 3: Density units
on page 78.
Unit Temperature
Selection of unit for temperature.
Refer to
Table 4: Temperature units
on page 78.
Concentration
Selection of unit for concentration measurement.
Refer to
Table 5: Concentration units
on page 79.
Variable 1 Name
Selection of the unit for external process variables.
The transmitter can show two external process variables in the display. The process variables can be transferred from the
fieldbus master to the transmitter via the HART, Modbus or PROFIBUS DP protocol. You can configure the indicator through
the ‘Display’ menu.
Variable 2 Name
Device Setup / ...Transmitter / ...Custom Units
Mass flow Qm Name
Sets the name or abbreviation of the user-defined unit for mass flow.
Mass flow Qm Factor
Sets the factor of the user-defined unit for mass flow in kg / seconds.
Mass Tot. Name
Sets the name or abbreviation of the user-defined unit for the mass counter.
Mass Tot. Factor
Sets the factor of the user-defined unit for the mass counter in kg.
Volumeflow Qv Name
Sets the name or abbreviation of the user-defined unit for volume flow.
Volumeflow Qv Factor
Sets the factor of the user-defined unit for volume flow in liters/seconds.
Volume Tot. Name
Sets the name or abbreviation of the user-defined unit for the volume totalizer.
Volume Tot. Factor
Sets the factor of the user-defined unit for the volume totalizer in liters.
Density Name
Sets the name or abbreviation for the user-defined density unit.
Density Factor
Sets the factor for the user-defined density unit in liters/seconds.
Temperature Name
Sets the name or abbreviation for the user-defined temperature unit.
Temperature Factor
Sets the factor for the user-defined temperature unit in °C.
