104
CoriolisMaster FCB400, FCH400
CORIOLIS MASS FLOWMETER | OI/FCB400/FCH400-EN REV. E
… 9 Operation
… Parameter descriptions
Menu / parameter
Description
Device Setup / ...Concentration
The menu is only available if the DensiMass function is activated
Medium
Selection of measuring medium for concentration measurement using the DensiMass function.
• Variable
Matrix
• Sodium
Hydroxide
• Alcohol
Water
• Wheat
Starch
• Corn
Starch
• Sugar in H2O
• °API
Gravity
Sub Matrix Selection
Selection of sub-matrix for concentration measurement.
Only available if the matrix selected from Medium has two sub-matrices.
Reference Temp.
Sets the reference temperature for calculating process variables Vol.Flow@Tref and Density@Tref [unit].
Device Setup / Variable Matrix
...Configuration Selection
of
submenu ‘...Configuration’ using
.
Matrix Name
Entry of a name for the variable matrix.
Unit Name
Entry of a unit name for the variable matrix.
Concentration Min
Entry of the maximum permissible concentration.
Concentration Max
Entry of the minimum permissible concentration.
...
Matrix 1 Unit
Selection of submenu ‘’
...
Matrix 1 Unit’ to enter Matrix 1 using
.
See chapter
Concentration measurement DensiMass
on page 125 for further information.
...
Matrix 1 Percent
...
Matrix 1 Calculation
...
Matrix 2 Unit
Selection of submenu ‘
...
Matrix 2 Unit’ to enter Matrix 2 using
.
See chapter
Concentration measurement DensiMass
on page 125 for further information.
...
Matrix 2 Percent
...
Matrix 2 Calculation
Enter Matrix Finish
Device Setup / Variable Matrix / ...Configuration
Number Matrices
Selection of number (1/2) of the matrices.
Number Temp.
Entry of the number of temperature values.
Number Conc.
Entry of the number of concentration values.
Enter Conc. in %
Selection of whether the concentration value must be entered in %.
• Yes: Entry of the concentration values in %
• No: Entry of the concentration values in a selected unit.
NOTICE
A net flow cannot be calculated if the concentration has only been entered in a unit. To enable the net flow to be calculated,
the concentration must also be entered in %.
Qm / Qv Conc. Switch
Selection of whether the entered concentration values are volume or mass concentration values. The values are used to
calculate the mass flow or volume flow rate.
• Mass
Concentration
• Volume
Concentration
Reset Matrix
All entered matrix values are reset to ‘0’.
