Language
Operator Templates
Page 1 (4) Template
Operator Functions
Autoscroll
Soft Key Function
Auto Manual Enable
Local Remote Enable
Alarm Ack. Enable
SP Adjust Enable
Settings
Brightness
Contrast*
Date & Time
Date Format
Time & Date
Daylight Saving
SP Adjust Enable
Analog Inputs
Anlg Input 1 (4)
Analog Outputs
Analog Output 1 (2)
Digital I/O
Digital IO 1 (6)
Relays
Relay 1 (4)
Loop 1 Setpoints
Low Limit
High Limit
No. of Local SP’s
Local Setpoint 1
Track Mode
RSP Ratio
RSP Bias
RSP Fault Action
Default Setpoint
Ramp Mode
Ramp Rate
Select Sources
Loop 1 Control
Control Type
Control Action
On/Off Hysteresis
Autotune
PID
Loop 1 Output
Limits
Failure Actions
A/M Select Sources
Slew Rate
Tracking
Loop 1 Split O/P
Min Input 1
Min OP 1
Max Input 1
Max OP 1
Min Input 2
Min OP 2
Max Input 2
Max OP 2
Loop 1 Time Prop
Cycle Time 1
Cycle Time 2
Basic
Device Setup
Display
Input/Output
Control
Menu
Menu
Menu
Exit
Select
Exit
Select
Exit
Select
Exit
Select
Exit
Select
Initial Setup
App. Template
Loop 1 Output Type
Loop 1 Split O/P
Instrument Tag
Mains Freq.
Config Action
Custom Template
Reset to Defaults
Security Setup
Basic Password
Advanced Password
Reset Passwords
Custom Config
Note
. When in Advanced Level (configuration) mode, press and hold the
key to return to the standard Operator page – see Fig. 3.1, page 5
*Enabled for CM30 and CM50 only
Refer to Section 7.2, page 39
Refer to Section 7.3, page 43
Refer to Section 7.4, page 51
Refer to Section 6, page 27
Refer to Section 7.1, page 36
Menu
Menu
See
Back
Cover
Loop 1 Setpoints
Local Setpoint 1 (4)
RSP Ratio
RSP Bias
Ramp Mode
Ramp Rate
Loop 1 Control
On/Off Hysteresis
Mode
Autotune
PID
Loop 1 Mot Valve
Ratio
Bias
Deadband
Travel Time
Loop 1 Time Prop
Cycle Time 1
Cycle Time 2
Alarm 1 (8)
Trip