Operation
Product manual 2CKA001473B9679
│59
9.4.3
Adjusting the fan speed levels
Notice
– The following illustration shows an example of a configuration.
– The function can be individually parameterized on one of the buttons.
Au to
°C
°C
ECO
6
1
4
1. Press button [4] to set the desired fan
speed level.
Fig. 33: Selecting the fan speed level operating mode
0
5
"Fan speed levels" function
2. Use button [1] or [6] to switch
between the fan settings.
5 speed levels are available to select for
the manual fan setting.
– The set fan speed level is adopted
when a timeout happens after
nothing has been pressed for a
certain period of time, or if button [4]
is pressed again.
– The manually set fan speed level is
shown in the setpoint on the display
at the bottom right.
– The fan speed level that is set is
stored automatically.
"Fig. 34: Fan speed levels" function
If "AUTO" is selected, the device control
system will take on the task of
determining the fan speed level.
Fig. 35: Fan speed level "AUTO"
Notice
The function of the fan speed levels can be parameterized.
This function is inactive if parameter "Fan coil" has not been parameterized.
Chapter 11.4.2 “Fan coil settings“ on page 140
