Description of application and parameters
"Relative humidity" application
Product manual 2CKA001473B9679
│191
11.6.28 Step controller — Switch command above threshold 2
Options:
Off
On
The parameter defines which state should be sent after threshold value 2 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
Notice
The parameter is available only when parameter "Controller type" is set on
"Two-stage" or "Three-stage".
11.6.29 Step controller— Priority above threshold 2
Options:
End priority
OFF with priority
ON with priority
The parameter defines which state should be sent after threshold value 2 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Priority".
Notice
The parameter is available only when parameter "Controller type" is set on
"Two-stage" or "Three-stage".
