Communication objects
Communication objects
Product manual 2CKA001473B9679
│361
12.1.87 RH - Threshold 1
Name
Object function
Data type
RH: Threshold 1
Output
1.001 Switching
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.
12.1.88 RH - Threshold 2
Name
Object function
Data type
RH: Threshold 2
Output
1.001 Switching
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.
12.1.89 RH - Threshold 3
Name
Object function
Data type
RH: Threshold 3
Output
1.001 Switching
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.
12.1.90 RH - Relative humidity setpoint
Name
Object function
Data type
RH: Relative humidity setpoint
Output
9.* 2-byte floating point value
Another basic set value can be specified for the device via the object.
Once a new value has been received, this acts as the new reference point and therefore has a
direct impact on the measuring results of the device.
12.1.91 RH - Block output
Name
Object function
Data type
RH: Block output
Input
1.001 Switching
When the value "1" is received, all the KNX communication of the humidity sensor is blocked
and is no longer part of KNX bus communication.
Unblocking happens when the value "0" is received.
