- 18 -
008CC3
4 - Connect and configure the CDD
D
HCP configuration
If no wireless networks are found, it may be necessary to change the DHCP settings. The
wireless setting must first be disabled.
Step 1 - Press any button to display the BASIC information menu relating to the CDD
•
Press UP or DOWN until the
WLess enabled YES
screen is displayed.
•
Press ENTER to remove the > (arrow) next to YES.
•
Press the UP or DOWN button to choose the option NO.
• Press ENTER to confirm.
Step 2 – Press and hold the UP and DOWN buttons together in
order access the MAIN MENUS; a password is required:
• The first screen will display the message
Set Password.
•
Input the default password (0010) using the UP or DOWN buttons to change the number.
• Press ENTER to confirm each number; and press ENTER when complete (Use ESC to
return to the previous character).
•
After the password is entered, scroll DOWN to locate the
Change Settings
; menu and press ENTER.
•
Scroll DOWN to the
Network
submenu.
•
Press ENTER, and scroll to
DHCP Enabled
.
•
Press ENTER, and choose to Enable or Disable the DHCP
function (YES/NO).
• Press ENTER to confirm.
Step 3 - Re-Enable the wireless following Step 1 above.
•
Press ENTER to remove the > (arrow) next to NO.
•
Use the UP or DOWN button to choose the option YES.
• Press ENTER to confirm.
If the DHCP function is
Disabled
, it is necessary to set up the static IP network address
of the CDD to access the CDD Web Server for acquisition of the MICRO inverters in
part 4. Find the IP network address in the submenu Web Server IP show below.
I
P address view
With the CDD connected to the network it is possible to view the IP address assigned to the
device.
•
Press ESC to access the previous level of the BASIC menu
(or press any button from the GENERAL INFORMATION
display).
•
Scroll to
WebServer IP
from the BASIC menu.
The IP address that is displayed will be used in part 4, to access the CDD Web Server using
a computer or tablet.
Web Server IP
.........
WLess enabled
YES >
WLess enabled
NO >
WLess enabled
NO >
Set Password
XXXX
Change
Settings >
Network >
NO >
DHCP Enabled