manualshive.com logo in svg

ABB Arc Guard System TVOC-2, Installation And Maintenance Manual

Share
Download
ABB Arc Guard System TVOC-2 Installation And Maintenance Manual Download Page 66

Human Machine Interface, functions

64

1 Trip Log

When the optical detectors detect arcs, the Arc Monitor reacts. The system 
will trip the trip contacts according to the configuration on the DIP switches.

Arc Monitor is designed to save information about an arc in the Trip Log. 

The Trip Log can store seven trips in a circular buffer, the oldest will be over-
written.

This section describes how to handle the Trip Log.

Trip notification 
window

When a trip occurs a notification window will be displayed on the display.

The notification window display the following:

•

Which detector reacted. 

•

Which trip contact tripped.

•

Time and Date the arc occurred.

To reset the Trip Signal Relays, K2 and K3 do the following steps:

1

In the notification window press Reset.

2

The notification window disappears and the system returns to Start window.

3

The trip is stored in the Trip Log.

Note!

If Auto reset of K2 and K3 is configured at the DIP switches, the notification 
window will appear at a trip but there is no need to reset. Then press Menu 
to return to Start window.

Trip has occured

Reset

Detector X1 : 10

Breaker K4 K5

14:02  3-feb-2009

Summary of Contents for Arc Guard System TVOC-2



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands