manualshive.com logo in svg

ABB Arc Guard System TVOC-2, Installation And Maintenance Manual

Share
Download
ABB Arc Guard System TVOC-2 Installation And Maintenance Manual Download Page 59

Trouble shooting

57

Viewing error log

To view the Error Log do the steps below:

1. From the Start window, press Menu.

2. In the Menu, select 2. Diagnostics and press OK.

3. Select 2.3 Error Log and press OK.

4. The Error Log window displays Error code, Time, and Date.

5. Scroll forward/backward in the Error Log.

6. Press Back to return to window 2. Diagnostics.

7. Press Back to return to Start window.

List of error codes

The error codes and description of the codes are discussed in the following 
list:

Note!

This is not a complete error code list!

This list only shows some of the most simple error codes in which the user 
may be able to take actions on their own. 

2.3 Error Log 1 (3)

Back

134 0   0   0   0   0

14:02  3-feb-2009

Error code

Description

Recommended actions

0 0 0 2 0 0

DIP switch settings are changed 
during run-time.

1) Set settings back as it was 
before, after a while the Sys-
tem Error pop-up window will 
disappear and the IRF will be 
energized again.

Summary of Contents for Arc Guard System TVOC-2



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands