320 Parameters
Encoder 1 revolution
extension
Displays the revolution count extension for encoder 1.
With a single-turn encoder, the counter is incremented
when encoder position (parameter
) wraps around in
the positive direction, and decremented in the negative
direction.
With a multiturn encoder, the counter is incremented when
the revolutions count (parameter
) exceeds the value
range in the positive direction, and decremented in the
negative direction.
This parameter is read-only.
-
-2147483648
…2147483647
Encoder 1 revolution count extension.
-
Displays the raw measurement data of encoder 1 position
(within one revolution) as a 24-bit unsigned integer
received from the encoder interface.
This parameter is read-only.
-
0…16777215
Raw encoder 1 position within one revolution.
-
Displays the revolutions of (multiturn) encoder 1 within its
value range (see parameter
as a raw measurement.
This parameter is read-only.
-
0…16777215
Raw encoder 1 revolution count.
-
Displays encoder 2 speed in rpm.
This parameter is read-only.
-
-32768.00
…32767.00 rpm
Encoder 2 speed.
See par.
Displays the actual position of encoder 2 within one
revolution.
This parameter is read-only.
-
0.00000000
…1.00000000 rev
Encoder 2 position within one revolution.
-
Encoder 2 multiturn
revolutions
Displays the revolutions of (multiturn) encoder 2 within its
value range (see parameter
This parameter is read-only.
-
0…16777215
Encoder 2 revolutions.
-
Encoder 2 revolution
extension
Displays the revolution count extension for encoder 2.
With a single-turn encoder, the counter is incremented
when encoder position (parameter
) wraps around in
the positive direction, and decremented in the negative
direction.
With a multiturn encoder, the counter is incremented when
the revolutions count (parameter
) exceeds the value
range in the positive direction, and decremented in the
negative direction.
This parameter is read-only.
-
-2147483648
…2147483647
Encoder 2 revolution count extension.
-
No.
Name/Value
Description
Def/
FbEq16
Summary of Contents for ACS880 PCP
