Introduction 11
1
Introduction
Contents of this chapter
This chapter describes the compatibility, safety instructions, intended audience and
contents of this manual. It also contains a list of terms and abbreviations used in this
manual.
Applicability
This manual applies to the ACS880 PCP/ESP control program (version 2.12 or later).
The firmware version of the control program is visible in parameter
, or the
System info
in the main menu on the control panel.
The application version of the control is visible in the
System info
in the main menu
on the control panel.
Safety instructions
Obey all safety instructions for the drive.
• Read the
complete safety instructions
before you install, commission, or use
the drive. The complete safety instructions are delivered with the drive as either
part of the
Hardware manual
, or, in the case of ACS880 multidrives, as a separate
document.
• Read the
firmware function-specific warnings and notes
before changing
parameter values. These warnings and notes are included in the parameter
descriptions presented in chapter
Summary of Contents for ACS880 PCP
