ABB ACH580-01 Series, Hardware Manual

Page: 289 / 396

Technical data 289
Brake resistor connection data for frames R1…R3
Short-circuit protection
(IEC/EN 61800-5-1, IEC 61439-1,
UL 508C) The brake resistor output is conditionally short-circuit proof
by IEC/EN 61800-5-1 and UL 508C. Rated conditional
short-circuit current as defined in IEC 61439-1.
Control connection data
External power supply Maximum power:
Frames R1…R5 25 W, 1.04 A at 24 V AC/DC ±10%
with an option module
Frames R6…R9: 36 W, 1.50 A at 24 V AC/DC ±10% as
standard
Supplied from an external power supply through option
module CMOD-01 or CMOD-02 with frames R1…R5. With
frames R6…R9 no options are needed.
Terminal size:
Frames R1…R5: 0.2…2.5 mm
2
(24...14 AWG)
Frames R6…R9: 0.14…2.5 mm
2
(26...14 AWG)
+24 V DC output
(Term. 10) Total load capacity of this outputs is 6.0 W (250 mA / 24 V)
minus the power taken by the option modules installed on
the board.
Terminal size:
Frames R1…R5: 0.2…2.5 mm
2
(24...14 AWG)
Frames R6…R9: 0.14…2.5 mm
2
(26...14 AWG)
Digital inputs DI1…DI6
(Term. 13…18) Input type: NPN/PNP
Terminal size:
Frames R1…R5: 0.14…1.5 mm
2
(26...16 AWG)
Frames R6…R9: 0.14…2.5 mm
2
(26...14 AWG)
DI1…DI5 (Term.13…17)
12/24 V DC logic levels: “0” < 4 V, “1” > 8 V,
10 to 24 V AC
R
in
: 3 kohm
Hardware filtering: 0.04 ms, digital filtering: 2 ms sampling
DI5 (Term.17)
Can be used as a digital or frequency input.
12/24 V DC logic levels: “0” < 3 V, “1” > 8 V,
10 to 24 V AC
R
in
: 3 kohm
Max. frequency 16 kHz
Symmetrical signal (duty cycle D = 0.50)
DI6 (Term. 18)
Can be used as a digital or PTC input.
Digital input mode
12/24 V DC logic levels: “0” < 4 V, “1” > 8 V
R
in
: 3 kohm
Hardware filtering: 0.04 ms, digital filtering: 2 ms sampling