ABB 888-2 Applications Manual Download

Page: 84 / 88

Action

After the device has been configured, delete the modules that should be owned by
another controller.

•

Right-click on the module > click

Delete

on the shortcut menu.

The configuration should have the following appearance:

xx1500001664

Download the

ippnio.xml

file to the

HOME

directory of the currently used RobotWare

system in the IRC5 controller using an FTP client.

Configure the second controller the same way as mentioned in the above steps 1-2,
except that the other nodes should be deleted. That is, the modules owned by first
controller are deleted.

The second controller configuration should have the following appearance:

xx1500001665

Download the ippnio.xml file to the

HOME

directory of the currently used RobotWare

system in the second IRC5 controller using an FTP client

Restart both IRC5 controllers.

Application manual - PROFINET Controller/Device

3HAC050969-001 Revision: G

C Using PROFINET Configurator Express

Continued

Summary of Contents for 888-2
























































































Search results

Summary of Contents for 888-2

Reviews:

Related manuals for 888-2

Brands by name

Popular brands

ABB 888-2, Applications Manual

Search results

Summary of Contents for 888-2

Reviews:

Related manuals for 888-2

Brands by name

Popular brands