ABB 888-2, Applications Manual

Page: 72 / 88

N
N is a PC software used to manage the PROFINET network, organize
the PROFINET devices, and avoid duplicated IP addresses and station names.
N is included in the PROFINET-IO Configurator Express package available
in the RobotWare distribution package.
xx1300002216
Installation
N is included in the PROFINET-IO Configurator Express installation, see
PROFINET-IO Configurator Express on page 71 .
Use this procedure to install the N.
Note Action
Start N. 1
Select Network Adapter to the Ethernet
adapter used on the PC that connects to
the PROFINET network.
2
Click Options and make sure that Save
IP Addresses permanently is selected.
This makes sure that a name or IP ad-
dress change sent down from N
is saved by the PROFINET device.
3
Now N will list all PROFINET
devices that are reachable on the network.
Using this view, it is possible to change
a device configuration parameters. Click the Refresh button. 4
Note
Gateway cannot be set, see Limitations.
To change a device's parameters, double-
click on that device and fill in the values
that need to be changed.
When done, click the
Send button.
5
Continues on next page
72 Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G
© Copyright 2015-2018 ABB. All rights reserved.
A About the third party tool information
Continued