ABANTERA 149C24F21SJ, User Manual

Page: 25 / 138

24 |
functioninG
u n i t e d s tat e s
BEFORE THE FIRST USE
2
Remove any stickers or protective foil from the ultra-light, high-precision ceramic base.
1
Select the high steam power indicator on the control panel, once the light stops flashing, use the
unit on a damp cloth for several minutes to remove any debris that may stick to the ultra-light
ceramic base and high precision at the time of manufacture.
ATTENTION
On rare occasions, a strange smell may be generated from the unit during the first use,
this will stop after having used the iron for a few minutes and is due to some residue
adhered to the ultralight ceramic base and high precision in its manufacture.
Some particles may come out of the ceramic base when you use the unit for the first
time; the particles are harmless and stop coming off the plate after a few minutes.
When the unit is turned on, the steam generator may produce a pumping sound,
this is normal, the sound tells you that water is being pumped into the steam generator.
During the heating process of the ceramic base, a little steam will come out automatically
for about 3 seconds.
ATTENTION
Never touch the hot ceramic base before it cools down!
ATTENTION
AUTO POWER OFF
The main unit will automatically turn off after 10 minutes if no steam comes out of the
ceramic base. The unit will go into power saving mode when steam is not coming out for
a long time. If you need to exit the energy saving mode, just press the steam trigger once,
at that time, the selected steam power indicator will flash and the unit can release steam
after the steam power indicator stops. to blink.