ABANTERA 149C24F21SJ, User Manual

Page: 23 / 138

22 |
FUNCTIONING
u n i t e d s tat e s
Functioning
UNIT OPERATION INFORMATION
149 c24f21 SJ
2
3
4
5
6
Filling opening
Fill the water tank of the
149 C24F21 SJ
unit only
and exclusively with special water for ironing that you
can find on any large surface, do not use water from
your water network under any circumstances. Make
sure the water does not exceed the MAX mark on the
water tank.
1
Power on
Plug in the unit and press the power switch, the
power indicator will light up. Low steam power is
considered the default and its indicator will flash.
Press the power switch for about 2 seconds and the
appliance will turn off.
Steam power control switch
The steam power can be selected as low, medium or high using the steam power indicator. If
one of them is selected, its indicator will flash and illuminate steadily once the selected vapor
concentration is ready.
Temperature dial
Turn the temperature dial to adjust the temperature of the ultra-light, high-precision ceramic
base according to the needs of the item to be ironed.
Temperature indicator
When the ultra-light, high-precision ceramic base is preheating, the temperature indicator will
light up. Once you have reached the selected temperature, the temperature indicator will turn off.
The temperature indicator will cycle on and off as the unit maintains the selected temperature
during ironing.
Steam activator
After pressing the power switch, choose the desired steam power and the steam power indicator
does not blink, press the steam trigger with a little force, the steam will be sprayed from the ultra-
light and high-precision ceramic base continuously. When you release the steam trigger, the unit
can be used for dry ironing without steam.
Throw