ab Solares Smart Spa, Operating Manual

Page: 24 / 40

Solares™ Smart Spa Bathing System Operating Manual
CD0036 - 24 - 1121
Bathing:
A green light on a button indicates that
the valve is currently open or that the
whirlpool is running in the case of the
Whirlpool button.
Tub Fill – Push the tub fill button in to start
filling the tub. You can stop filling at any
time by pushing it again. The button will
release itself when the tub finishes filling.
Shower – Push the Shower button to activate
the shower wand.
Open/ Close Drain - operates tub drain.
Rapid Fill – opens the valve to drain water in
the Reservoir into the tub. Pump assisted
filling will begin once the water has filled
above the intake. The valve will close itself
after the tank is done draining, but it can be
closed at any time by pushing the button
again. Note: Pushing this will automatically
close the drain and enable tub fill.
Hydrologic ™ Whirlpool – Turns on the
whirlpool pump when pushed in. The pump
will only activate when water is above the
top jets. The button can be pushed before
the water level is high enough, the pump
just will not start until water has reached
the required level.
Reservoir operation *only if equipped:
Reservoir water temperature is displayed in
the top left of the screen when the tank is
full.
The light next to the fill button will turn green
when the tank is actively filling.
The reservoir fill button looks and operates a
bit differently depending on whether autofill
is enabled.
Manual fill. Tank set to fill
when button depressed. The
button will release once the tank is full and
the user will need to push it in again to repeat
filling.
Autofill. Tank set to keep
itself full. The tank will fill
whenever water is below the top sensor and
the tub is not filling. Push to prevent the
reservoir from continuing to fill at the end of
the day/ shift.
If you don’t stop it before it
starts filling you can manually drain per these
instructions .
Autofill. Fill disabled. Will not
fill the tank until the user
pushes the button. Push button to reenable
reservoir filling.