Solares™ Smart Spa Bathing System Operating Manual
CD0036
- 13 -
1121
5.
Lift the secondary lock handle and glide
the chair out of the tub and onto the
carrier until the Primary lock engages.
Verify the chair is locked to the carrier
by pushing the chair back towards the
tub. If the chair is secure, it will not be
able to move into the tub.
6.
Unlock the casters on the carrier.
Push the Carrier Release button twice to
unlatch the carrier from the tub.
Emergency Resident Removal
1.
In a life-threatening situation, all attention must focus on resident welfare, removal from the
tub, and acquiring medical assistance.
2.
Push Open Drain on the touch screen and then open the tub door. Water may rush out and
drain to the floor.
3.
The whirlpool motor will automatically shut off when the water level drops below the water
level sensor.
Remove Resident and attend to emergency
Electrical Failure
When electrical power has failed, the drain and carrier must be operated manually.
1.
Remove the right-side access panel from the
tub
2.
Locate the drain latch assembly; a plastic
loop (ring) is attached to it. Pull the ring up
until it pops out of the assembly.
3.
Turn the T-Handle 90° to the right and pull
the T-Handle to open the tub drain.
4.
When the tub is drained; open the door,
latch the carrier to the tub, lock the casters
and transfer the chair with the resident onto
the carrier. If the tub is tilted down,
additional help may be needed to transfer
the chair out of the tub onto the carrier.
5.
The Secure-
Glide™ Transfer System must be
manually released from the tub. Unlock the
casters. Pull the black manual carrier release
T-Handle to undock the Secure-
Glide™
Transfer System from the tub.
Plastic Loop
Drain T-Handle
Manual Release T-Handle
Summary of Contents for Solares Smart Spa
Page 30: ......
