Solares™ Smart Spa Bathing System Operating Manual
CD0036
- 21 -
1121
Changing Profile Settings:
Changing profile settings is as easy as
selecting the profile and then changing the
settings listed below. The settings are as
follows:
Resident- Name/ identifier of profile.
Water Temperature- Temperature tub fill
will be set to when the profile is selected.
Tilt- Enables/ Disables Auto Tilt. Auto Tilt is
enabled when set to “Yes” Note:
needs to be enabled under settings for it to
take effect.
Water Depth: Sets water height tub
automatically stops filling at. Low stops
right above top jets to allow whirlpool to
run and High fills to just below the
overflow.
Rapid Fill
™
- enables/ disables rapid fill
through the reservoir while a profile is
selected.
Adding Profiles:
1.
Push the “Add Resident(s)” button
on
the Residents screen to go to the Add
Residents screen.
2.
Adjust profile name/ settings per the
requirements of the profile.
3.
Tap “Add Resident” to save the profile
and start a new one or
tap “Save
Changes” to save the resident and
return to the Resident screen.
Removing Profiles:
1.
Push the “Remove Resident(s)” button
on the Residents screen to go to the
Remove Residents screen.
2.
Select the profile you want to remove
and tap “Remove”.
3.
Tap “Return to Residents” when
finished.
Summary of Contents for Solares Smart Spa
Page 30: ......
