59
Port Statistics
The following chart provides the current statistics information which displays the real-time
packet transfer states for each port. The user might use the information to plan and
implement the network, or check and find the problem when the collision or heavy traffic
occurs.
Port:
Port number indexed.
Type:
Displays the network media type of the port.
Link:
The states of linking—‘
Up
’ or ‘
Down
’.
State:
Displays port states set by the Port Control interface. When the state is
disabled, the port will not transmit or receive any packet.
Tx Good Packet:
The counts of transmitting good packets via this port.
Tx Bad Packet:
The counts of transmitting bad packets (including undersize [less
than 64 bytes], oversize, CRC Align errors, fragments and jabbers packets) via this
port.
Rx Good Packet:
The counts of receiving good packets via this port.
Rx Bad Packet:
The counts of receiving good packets (including undersize [less
than 64 bytes], oversize, CRC error, fragments and jabbers) via this port.
Tx Abort Packet:
The counts of aborted packets while transmitting.
Packet Collision:
The counts of packet collision.
Packet Dropped:
The counts of dropped packets.
Rx Bcast Packet:
The counts of broadcast packets.
Rx Mcast Packet:
The counts of multicast packets.
Click the Clear button to clean all counts.
Summary of Contents for LNX-1002NM-67-T
