AAxeon LNX-1002NM-67-T, User Manual

Page: 58 / 141

53
EAST - East Australian
Standard GST
Guam Standard, USSR
Zone 9
+10 hours 10 pm
IDLE - International Date
Line
NZST - New Zealand
Standard
NZT - New Zealand
+12 hours Midnight

SNTP Sever URL: Specify the SNTP server IP address. You can assign a local
network time server IP address or an internet time server IP address.

Switch Timer: When the switch has successfully connected to the SNTP server
whose IP address was assigned in the field of SNTP Server URL , the current
coordinated time is displayed here.

Daylight Saving Period: Set up the start and end date/time of the daylight saving
period. Please key in the value in the format of ‘YYYYMMDD’ and ‘HH:MM’ (leave a
space between ‘YYYYMMDD’ and ‘HH:MM’).

YYYYMMDD: an eight-digit year/month/day specification.

HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in ‘20070701 02:00’ and ‘20071104 02:00’ in the two fields
respectively to represent that DST begins at 2:00 a.m. on March 11, 2007 and ends
at 2:00 a.m. on November 4, 2007.

Daylight Saving Offset (mins): For non-US and European countries, specify the
amount of time for day light savings. Please key in the valid figure in the range of
minute between 0 and 720, which means you can set the offset up to 12 hours.

Synchronization Interval (secs): The Synchronization Interval is used for sending
synchronizing packets periodically. Users can assign the time ranging from 64 to
1024 seconds. The “0” value displaying by default means that you disable the
auto-synchronized feature in the SNTP client mode. You can enable the feature by
filling the interval range from 64~1024 seconds.

Click Apply to have the configuration take effect.