AAxeon LNX-1002NM-67-T, User Manual

Page: 100 / 141

95
X-Ring2
X-Ring provides a faster redundant recovery than the Spanning Tree topology. The
action is similar to STP or RSTP, but the algorithms between them are not the same. To
configure an X-Ring group, the X-Ring function has to be enabled on each switch whose
two ports connecting to the ring group in which should be assigned as the member ports.
The two switches forming the last segment of the X-Ring topology will automatically be
designated as master switches between which the connection is called the backup path.
Known as backup ports, the two ports of the backup path will be blocked. Also, the user
can identify whether the switch is the ring master device by checking the LED indicator on
the panel of the switch.
Other switches in the X-Ring group are naturally the working (forwarding) switches and
both their two member ports are working (forwarding) ports. If the failure of network
connection occurs, the backup ports of master switches (ring master devices) will
automatically become working (forwarding) ports to recover from the failure.

X-Ring2 Operation Mode: Click the pull-down menu to configure the operation
mode for X-Ring2 or disable the X-Ring2 function.
►X-Ring2 Mode

Ring ID: Specify a number ranging from 0 to 99 for identifying a given ring group.

1
st
Ring Port: One of the two member ports of this switch connecting to the ring
group. Click the pull-down menu to select a port as the first ring port.

2
nd
Ring Port: The other member port of this switch connecting to the ring group.
Click the pull-down menu to select a port as the second ring port.

Mode: Click the pull-down menu to select ACTV, PASV and NORM mode for
connection of redundant ports.

1
st
Rdn Port: Click the pull-down menu to select a port as the first redundant port.

1
st
Rdn Port ID: Specify a number ranging from 0 to 99 for identifying the first
redundant port.