94
Port x:
Four priority levels, High, Middle, Low, and Lowest, are available.
Click the Apply button to have the configuration take effect.
►COS Configuration
Configure this item to allocate the identified packet to different queues according to the
packet’s 3-bit 802.1p priority classification field that is embedded in the 4-byte 802.1q
VLAN tag field. Before configuring this field, users have to select the
Use a strict priority
scheme
radio button and set the
Priority Type
on
COS only
or
COS first
.
Priority:
The 3-bit 802.1p priority values range from 0 to 7. Click the pull-down menu
to specify the corresponding queue for the identified COS value (priority) to which the
identified frame will be sent.
Click the Apply button to have the configuration take effect.
►TOS Configuration
Configure this item to allocate the identified packet to different queues according to the
packet’s 6-bit DSCP (Differentiated Service Code Point) value inside the 1-byte ToS
(Type of Service) field. The 6-bit DSCP value defines up to 64 priority values. Therefore,
you can assign one of the four queues to each priority respectively.
Priority:
Click the pull-down menu to specify the corresponding queue for the
identified TOS (DSCP) value to which the identified packet will be sent.
Click the Apply button to have the configuration take effect.
Summary of Contents for LNX-1002NM-67-T
