AAxeon LNX-1002NM-67-T, User Manual

Page: 137 / 141

132
configuration
command to set the
reauth period.
8021x portstate
[disable | reject | accept |
authorize]
I Use the 802.1x port
state interface
configuration
command to set the
state of the selected
port.
switch(config)# interface
fastethernet 3
switch(config-if)# 8021x portstate
accept
show 8021x E Displays a summary of
the 802.1x properties
and also the port
sates.
switch> show 8021x
no 8021x G Disable 802.1x
function
switch(config)# no 8021x
TFTP Commands Set
Commands Level Description Defaults Example
backup
flash:backup_cfg
G Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)# backup
flash:backup_cfg
restore flash:restore_cfg G Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)# restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)# upgrade
flash:upgrade_fw