AAxeon LNX-1002NM-67-T, User Manual

Page: 120 / 141

115
ip dhcp G Enable DHCP client
function of switch
switch(config)# ip dhcp
show ip P Show IP information of
switch
switch# show ip
no ip dhcp G Disable DHCP client
function of switch
switch(config)# no ip dhcp
reload G
Halt and perform a cold
restart
switch(config)# reload
default G Restore to default switch(config)# default
admin username
[Username]
G Changes a login
username.
(maximum 10 words)
switch(config)# admin username
xxxxxx
admin password
[Password]
G Specifies a password
(maximum 10 words)
switch(config)# admin password
xxxxxx
show admin P Show administrator
information
switch# show admin
dhcpserver enable G Enable DHCP Server switch(config)# dhcpserver enable
dhcpserver lowip
[Low IP]
G Configure low IP
address for IP pool
switch(config)# dhcpserver lowip
192.168.1.100
dhcpserver highip
[High IP]
G Configure high IP
address for IP pool
switch(config)# dhcpserver highip
192.168.1.200
dhcpserver subnetmask
[Subnet mask]
G Configure subnet
mask for DHCP clients
switch(config)# dhcpserver
subnetmask 255.255.255.0
dhcpserver gateway
[Gateway]
G Configure gateway for
DHCP clients
switch(config)# dhcpserver
gateway 192.168.1.254
dhcpserver dnsip
[DNS IP]
G Configure DNS IP for
DHCP clients
switch(config)# dhcpserver dnsip
192.168.1.1
dhcpserver leasetime
[Hours]
G Configure lease time
(in hour)
switch(config)# dhcpserver
leasetime 1
dhcpserver ipbinding
[IP address]
I Set static IP for DHCP
clients by port
switch(config)# interface
fastEthernet 2
switch(config-if)# dhcpserver
ipbinding 192.168.1.1
show dhcpserver P Show configuration of switch# show dhcpserver