Aastra Dialog 4425 IP Vision User Manual Download Page 33

Page: 33 / 224

MD Evolution – Dialog 4425 IP Vision

Introduction to Your Extension

Display

Your extension features a display screen that is 320 x 80 pixels, or

6 lines high x 50 characters wide, depending on the font used.
See also the “

Display Information

” section.

Dynamic Function Keys

Dynamic functions are services that are accessible depending on

the status of your calls. The corresponding text labels are displayed

on the last line of the extension’s display. They are selected by

pressing the corresponding dynamic function key.
See also the “

Display Information

” section.

Left, Home and Right Navigation Keys

Å Æ Ç

The navigation keys enable you to select the desired service from a

list of tabs located on the first line of your extension’s screen.

These services mainly relate to the physical programming of your

extension, access to the call list for your extension, as well as

access to your personal phone book.
See also the “

Physical Programming of Your Extension

”, and

“

Directory, Phone Book and Call List

” sections.

Menu

Menu Key

This fixed function key enables you to access the programming of

your extension in relation to various services, such as call forwarding

or your user password management.
See also the “

Programming Your Extension’s Services

” section.

Name

Name Key

This fixed function key enables you to directly access the call by

name service for your extension.
See the “

Directory, Phone Book and Call List

” section.

Call-Fwd

Call-Fwd (Call Forward) Key

This fixed function key enables you to activate a variable call

forwarding that was pre-defined on your extension. It also enables

you to deactivate or cancel any type of active call forwarding on

your extension, pre-defined or defined on a case by case basis.
See also the “

Call Forwarding Services

” section.

Message

Message Key

When your facility uses an integrated voice mail, this fixed function

key indicates when you have received a message in your mailbox.

Pressing this key enables you to directly access your facility’s voice

mail.
See also the “

Voice Mail Services

” section.

Summary of Contents for Dialog 4425 IP Vision
































































































































































































































Search results

Summary of Contents for Dialog 4425 IP Vision

Reviews:

Related manuals for Dialog 4425 IP Vision

Brands by name

Popular brands

Aastra Dialog 4425 IP Vision, User Manual

Search results

Summary of Contents for Dialog 4425 IP Vision

Reviews:

Related manuals for Dialog 4425 IP Vision

Brands by name

Popular brands