Aastra Dialog 4425 IP Vision User Manual Download Page 127

Page: 127 / 224

127

MD Evolution – Dialog 4425 IP Vision

Voice Mail Services

A new menu is therefore played, which prompts you to:
•

Dial “1” to hear the number currently saved for external

notification. This information is played back for you through

voice synthesis, one digit at a time.

•

Dial the sequence: “2 <External recipient number> #” to save

your external notification recipient number. It may contain up to

18 digits, including the network access prefix.

•

Dial “3” to activate or de-activate the external notification

service. If the service was initially inactive, it is then activated,

and vice versa. Deactivating the service has no impact on the

recipient number for the service that is reputed and remains

programmed.

•

Dial “4” to erase the number currently saved for external

notification.

•

Dial “9” to return to the main mailbox personalisation menu.

Dial “4” to manage your user password.

Your user password is the same as the one to access your mailbox

and activate or deactivate certain services from your extension.

Usually, you define it from your extension – see the “

Programming

Your Extension’s Services

” section. You may also manage it

through your mailbox.
By default, it is set to “1234”. You may replace it with any other

4-digit code.

Dial “3” to protect your extension from calls processed
through an automated attendant (AA).

If the service was initially inactive, it will be activated, and vice versa.
This is only applicable if your facility is equipped with an automated

attendant that enables the general processing of external calls to

be managed in lieu of your facility’s attendants.
In this case, you may usually be contacted through this automated

attendant. This service is to prevent any calls from being presented

on your extension by the automated attendant. An internal or

external calling party trying to contact you through the automated

attendant is then automatically directed to your mailbox.

Once the personalisation of your mailbox is completed:

Dial “9” to end personalisation.

You are then returned to your mailbox consultation menu:

Summary of Contents for Dialog 4425 IP Vision
































































































































































































































Search results

Summary of Contents for Dialog 4425 IP Vision

Reviews:

Related manuals for Dialog 4425 IP Vision

Brands by name

Popular brands

Aastra Dialog 4425 IP Vision, User Manual

Search results

Summary of Contents for Dialog 4425 IP Vision

Reviews:

Related manuals for Dialog 4425 IP Vision

Brands by name

Popular brands