Aastra Dialog 4425 IP Vision, User Manual

Page: 72 / 224

Operations during a Call
MD Evolution – Dialog 4425 IP Vision 72
Refer Back Call Between Two On-Line
Parties or Broker’s Call
During your enquiry call, supposing the second party has answered
your call, and your first party remains on hold while you carry on a
conversation with the second, you may alternate from one con-
versation to the other.
To do so:
L1
Ö Ô
Press the first line key that is flashing rapidly.
You are now transferred back to your first call, and your second call
is placed on hold.
To return to your second conversation:
L3
Ö Ô
Press the second line key that is flashing rapidly.
You are now transferred once again to the second call, and can
repeat this process as many times as desired.
í
Or, press the “C” key if you wish to end the conversation with
the current party.
This party’s call is disconnected, and you may then return to the call
that is currently on hold.
This operation is also applicable, if, when your enquiry call is being
placed, the second party does not answer.
Note:
It should be noted that these operations are the
same for answering an incoming call that is presented to
you during an ongoing call. See also the “ Operations for
Incoming Calls ” section.
Settings CallList PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
MARTIN Vincent 423
405
CONFERENC
Settings CallList PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
WESSON Paul 407
405
CONFERENC