Aastra Dialog 4425 IP Vision User Manual Download Page 117

Page: 117 / 224

117

MD Evolution – Dialog 4425 IP Vision

Voice Mail Services

•

Call forward on busy condition: Your calling parties are imme-

diately re-directed to your mailbox whenever your extension is

busy.

•

Call forward on no-answer and busy conditions: Your calling

parties are re-directed to your mailbox when there is no answer

and when your extension is busy.

•

Immediate call forward: All incoming calls are immediately re-

directed to your mailbox.

This may consist of a fixed call forward on no-answer condition, on

busy condition, or a call forward on no-answer and busy conditions

that was defined by your system administrator. This is applied by

default whenever you do not define a variable call forward for your

calls. This is often the case when a facility uses an integrated voice

mail system, which – by default – receives your calls encountering a

no-answer or busy condition.
You may also program the call forwarding to your mailbox yourself.

This variable call forward takes precedence over a possible fixed

call forward.
It may be managed on a case-by-case basis, for example – pro-

cessing an immediate call forward when you are away from the office.

It may also be pre-defined on your extension’s Call-Fwd key, in

which case, simply pressing that key would activate or deactivate

the variable call forward to your mailbox.
You may also use the call deflection service for redirecting incoming

calls to your mailbox. Call-by-call, this service allows you to directing

to your mailbox an incoming call that is presented to you, but that

you would rather not answer.
The operating modes for these different services are identical to the

other call forwarding services – see the “

Call Forwarding Services

”

section.

FWD NO

Simply, the recipient number for your call forward is then the internal

access number for your facility’s integrated voice mail system.

To identify the number to receive your call forward, no matter what

it is:

8 8 4

Dial 884.

This is the usual access number for a system’s integrated voice

mail system. If you need more information, contact your system

administrator.

Note:

This number is saved by default on your extension’s

Message key (see details to follow).

Summary of Contents for Dialog 4425 IP Vision
































































































































































































































Search results

Summary of Contents for Dialog 4425 IP Vision

Reviews:

Related manuals for Dialog 4425 IP Vision

Brands by name

Popular brands

Aastra Dialog 4425 IP Vision, User Manual

Search results

Summary of Contents for Dialog 4425 IP Vision

Reviews:

Related manuals for Dialog 4425 IP Vision

Brands by name

Popular brands