2
Model 6753i IP Phone User Guide
•
Headset mode support (via handset jack)
•
Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with
your computer.
•
Inline power support (based on 802.3af standard) which eliminates power adapters
•
AC power adapter (included)
•
Enhanced busy lamp fields*
•
Set paging*
*Availability of feature dependant on your phone system or service provider.
Requirements
The 6753i IP Phone requires the following environment:
•
SIP-based IP PBX system or network installed and running with a SIP account created for
the 6753i IP phone.
•
Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or HyperText Transfer Protocol over Secure Sockets Layer
(SSL) (HTTPS).
•
Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps)
recommended)
•
Category 5/5e straight through cabling (category 6 straight through cabling required for
optimum Gigabit Ethernet performance) Power source
— For Ethernet networks that supply in-line power to the phone (IEEE 802.3af):
— For power, use the Ethernet cable (supplied) to connect from the phone directly to the
network for power. (No 48v AC power adapter required.)
— For Ethernet networks that DO NOT supply power to the phone:
— For power, use the 48V AC Power Adapter (included) to connect from the DC
power port on the phone to a power source.
or
— (optional) - For power, use a Power over Ethernet (PoE) power injector or a PoE
switch. A PoE power injector is available as an optional accessory from Aastra
Telecom. Contact your Administrator for more information.
Installation and Setup
If your System Administrator has not already setup your 6753i phone, please refer to the
Aastra
6753i Installation Guide
for basic installation and physical setup of the 6753i. For more
advanced administration and configuration information, System Administrators should refer to
the
Aastra Models 9000i and 6700i Series SIP IP Phones Administrator Guide.
