STEINBERG CUBASE SX/SL /NUENDO (Mac & PC)
For Mac users, be sure you have copied the Aardvark ASIO
driver into Digital Performer's ASIO DRIVERS folder. If you are unsure
how to do this, please refer to step 10 of the Mac installation
instructions on page ((())).
Open the program and go to the DEVICES menu, then select
DEVICE SETUP. Next, select VST MULTITRACK. On the right, you'll
see a dropdown menu labeled ASIO DRIVER. Use the dropdown menu
to select the Aardvark ASIO driver. There should be no checkmarks in
"Release ASIO driver in background" or "Direct Monitoring". All other
settings here are a matter of preference, and in most cases, you'll want
to stick with the program defaults. Click OK
Go to DEVICES | VST INPUTS, and make sure all Aardvark
inputs are enabled.
Mac Users Please note: If Aardvark is not listed as an available driver,
you probably need to copy the Aardvark ASIO driver to
Cubase/Nuendo's ASIO DRIVERS folder.
STEINBERG WAVELAB (Mac & PC)
Go to OPTIONS | PREFERENCES and select the AUDIO CARD
tab.
Set Playback/Record to ASIO AARDVARK CARDS DRIVER
Depending on your setup, the ASIO selection may be worded
differently. Just be sure the selection says both ASIO and AARDVARK
Q10
SOFTWARE
STEINBERG CUBASE SX/SL™,
NUENDO™ & WAVELAB™ QUICKSTART
PAGE
3 6
3 6
DIRECT PRO Q10
O W N E R S M A N U A L
