IF YOU HAVE 3 Q10s:
Q10 #1
BOX- connect the S/PDIF out to the S/PDIF in of Q10 #2, and connect
the Word Clock In to the Word Clock Out of Q10 #2
In the panel for Q10 #1, set "source select" to WC
Q10#2
BOX- it should already have two cables connected to box one. In
addition, connect the S/PDIF out to the S/PDIF in of BOX #3
In the panel for Q10 #2, set "source select" to whatever sample rate
you intend to record with.
Q10#3
(This is the box you will monitor through, connect your
speakers/headphones to this box)
BOX- all necessary wiring was done in the prior steps
In the panel for Q10 #3, set "source select" to S/PDIF.
IF YOU HAVE 4 Q10s:
Q10 #1
BOX- connect the S/PDIF out to the S/PDIF in of Q10 #2, and connect
the Word Clock In to the Word clock out of Q10 #2
In the panel for Q10 #1, set "source select" to WC
Q10#2
BOX- it should already have two cables connected to box one. In
addition, connect the S/PDIF out to the S/PDIF in of BOX #3
In the panel for Q10 #2, set "source select" to whatever sample rate
you intend to record with.
Q10#3
BOX- Connect the S/PDIF out to the S/PDIF in of Box #4
In the panel for Q10 #3, set "source select" to S/PDIF.
Q10#4
(This is the box you will monitor through, connect your
speakers/headphones to this box)
BOX-Connect the Word clock output of Box #3 to The Word clock
input of Box #4
In the Panel for Q10 #4, set “source select to WC
Q10
ADDENDUM
USING MULTIPLE Q10s
PAGE
5 9
5 9
DIRECT PRO Q10
O W N E R S M A N U A L
