- Observe all accident prevention regulations.
- Do not allow
unauthorised
persons to stay under the raised vehicle.
- Avoid rocking of vehicle.
- Keep
hoist
free of tools, parts, etc.
1 Before lowering vehicle, be sure all personnel are clear of the
hoist
and surrounding area. Pay careful attention to
overhead clearances. Insure all tools and equipment have been cleared from under the
hoist
2 Turn the main switch to
the on
position.
Hoist
is ready for operation.
3 Raise the
hoist
off the safety locks by pressing the UP button on power unit.
Make sure you raise the
hoist
by at least 5
0
mm to allow adequate clearance for the locks to clear.
4
Push and hold
the lowering lever
and the locking lever simultaniously
until the
hoist
has descended completely.
When lowering the
hoist
PAY CAREFUL ATTENTION that all personnel and objects are kept clear.
ALWAYS keep a visual line of site on the
hoist
AT ALL TIMES. ALWAYS make sure that all FOUR LOCKS are disengaged.
If one of the locks inadvertently locks on descent the
hoist
and/or vehicle may disrupt causing personal injury or death.
5.6 Protection against unauthorised Usage
We recommend
the main
isolator
switch be
key lockable
.
During raising and lowering cycles: Closely watch the vehicle and the hoist,
do not allow anyone to stay in hoist area and make sure the vehicle doors are
closed.
LOWERING
LEVER
UP
5.
4
Vehicle in Raised Position
5.
5
Lowering
20
Summary of Contents for AutoLift AL-10000T
