SD CARD UPDATING INSTRUCTIONS
The Modular System Manager SD is equipped with an SD memory card that
contains the software to communicate to the various controllers. This SD
card can be removed and easily updated using a computer by downloading
updates as they become available from our website to your computer.
In order to perform any updates, your computer needs an SD card drive or
you will need to purchase an SD card adapter.
Download instructions are found in Appendix B of this manual.
AAON, Inc.
8500 NW River Park Drive · Parkville, MO 64152
Toll Free Phone: 866-918-1100
PH: (816) 505-1100 · FAX: (816) 505-1101
E-mail: [email protected]
Visit our website at www.orioncontrols.com
This document is subject to change without notice.
Form : AA-QSSMSD-TGD-01F
Copyright October 2018 AAON, Inc.
AAON Part Number: V38780
AAON
®
is a registered trademark of AAON, Inc., Tulsa, OK.
AAON
®
assumes no responsibility for errors or omissions in
this document.
www.aaon.com
IMPORTANT NOTICE
This Quick Start guide provides instructions for operating the Modular
Service Tool SD.
The Modular Service Tool SD Operator Interface Guide for each controller
is available for download from our website—orioncontrols.com, or if you
have the Modular Service Tool SD Card available, the technical guides can
also be printed from the SD card.
VCCX2 Controller - AA-VCCX2OISD-TGD
VCC-X Controller - AA-VCCXOISD-TGD
VCM-X & VCM-X E-BUS Controller - AA-VCMXRNEOISD-TGD
RNE Controller - AA-VCMXRNEOISD-TGD
SA E-BUS Controller - AA-SAOISD-TGD
VCB-X Controller - AA-VCBXOISD-TGD
VCM Controller - AA-VCMOISD-TGD
