A&D GF-1000 Instruction Manual Download

Page: 73 / 82

Display Error code

Description

EC, E03

Timeout error

If the timeout parameter is set to “

t-Up1

”, the balance

did not receive the next character of a command within
the time limit of one second.

Confirm the communication.

EC, E04

Excess characters error

The balance received excessive characters in a
command.

Confirm the command.

EC, E06

Format error

A command includes incorrect data.

e.g. The data is numerically incorrect.

Confirm the command.

EC, E07

Parameter setting error

The received data exceeds the range that the balance
can accept.

Confirm the parameter range of the command.

Other errors

If the errors described above can not be released or
other errors are displayed, contact the local A&D dealer.

20-3 Asking For Repair

If the balance needs service or repair, contact the local A&D dealer.

The balance is a precision instrument. Use much care when handling the balance and observe
the following when transporting the balance.

Use the original packing material.

Remove the weighing pan from the main unit

Summary of Contents for GF-1000



















































































Search results

Summary of Contents for GF-1000

Reviews:

Related manuals for GF-1000

Brands by name

Popular brands

A&D GF-1000, Instruction Manual

Search results

Summary of Contents for GF-1000

Reviews:

Related manuals for GF-1000

Brands by name

Popular brands