A&D GF-1000 Instruction Manual Download

Page: 17 / 82

5-2 Storing Units

The units or modes can be selected and stored in the function table. The sequence of displaying the
units or modes can be arranged to fit the frequency of use.

The units stored are maintained in non-volatile memory, even if the AC adapter is removed.

Select a unit or mode and arrange the sequence of display
as follows:

1 Press and hold the SAMPLE key until

ba5fnc

of the

function table is displayed, then release the key.

2 Press the SAMPLE key several times to display

Unit

3 Press the PRINT key to enter the unit selection mode.

4 Specify a unit or mode in the order to be displayed

using the following keys.

SAMPLE key

To sequentially display the units.

RE-ZERO key

To specify a unit or mode. The
stabilization indicator
appears when the displayed unit
or mode is specified.

5 Press the PRINT key to store the units or modes. The

balance displays

end

and then displays the next

menu of the function table.

6 Press the CAL key to exit the function table. Then the

balance returns to the weighing mode with the selected
unit.

7 To select other unit or mode for weighing, press the

MODE key.

Press and hold

Press

several times

Select

Specify

Store

Displays the units

sequentially.

Summary of Contents for GF-1000



















































































Search results

Summary of Contents for GF-1000

Reviews:

Related manuals for GF-1000

Brands by name

Popular brands

A&D GF-1000, Instruction Manual

Search results

Summary of Contents for GF-1000

Reviews:

Related manuals for GF-1000

Brands by name

Popular brands