106
BM
series
Option
AD-8127: Multi printer
Small dot impact printer that connects to the balance via the RS-232C interface.
Statistical calculation mode, calendar/clock function, interval printing mode, chart printing mode,
dump printing mode
AD-1691: Balance environment analyzer
During the routine inspection, repeatability and the minimum weighing value can be easily checked.
Also, this calculates measurement uncertainty and supports environmental evaluation of the balance.
This analyzer can be easily carried to the balance site, so more than one balance can be
controlled using this analyzer.
AD-1687: Weighing environment logger
A data logger equipped with 4 sensors for temperature, humidity, barometric pressure and
vibration that can measure and store environmental data. When connected to the RS-232C
interface of the balance, the AD-1687 can store environmental data along with weighing data.
Therefore, it is possible to store data in an environment where a computer cannot be used.
The stored data can be read to a personal computer using USB. As the AD-1687 is recognized
as USB memory, special software is not required to read the data.
AD-1688: Data logger
When connected to the RS-232C interface of the balance, the AD-1688 can store the data in
an environment where a personal computer cannot be used.
AD-8526: Ethernet converter
This option can be used to connect the RS-232C interface of the balance to the Ethernet (LAN) port of a
computer. This allows management of the balance weighing data with a computer connected to a network.
AD-8527: Quick USB adapter
This option transmits the weighing data directly to software applications such as Excel and Word.
AD-8920A: Remote display
Connected to the balance using the RS-232C interface.
AD-8922A: Remote controller
This option can be connected to the balance using the RS-232C interface and can control the
balance remotely. Various options such as comparator output or analog output are available.
AX-USB-9: USB converter
Adds a COM port to a personal computer.
Enables bi-directional communication between the personal computer and the balance when a
USB driver is installed
.
Can use serial communication software such as WinCT on a personal computer without COM ports.
An RS-232C cable is provided to connect the USB converter to the balance.
AD-1671
:
Anti-vibration table
Approximately 27 kg, Artificial stone (Terrazzo).
Use this table when unstable weighing is caused by vibration coming from the floor.
Use the AD-8922A remote controller to avoid a weighing error by a slight table tilt that key
operation may make.
AD-1672/AD-1672A Tabletop breeze break (Large)
Large sized table breeze break
Protects the balance from wind from sources such as air conditioning or people passing by,
thereby reducing balance weighing errors.
The transparent panel assembly consists of antistatic plastic material that protects the balance
from static electricity.
Samples can be inserted or removed through the opening on the front.
AD-1672:
680
(
W) x 600
(
D
)
x 720
(
H
)
mm, AD-1672A:
680
(
W) x 584
(
D
)
x 720
(
H
)
mm
Summary of Contents for BM-5
Page 1: ...Analytical Balance BM 5 BM 5D BM 20 BM 22 BM 252 BM 200 BM 300 BM 500 1WMPD4002195E...
Page 8: ...6 BM series...
Page 115: ......
