A-TS TECHNOLOGY Pulse Series User Manual Download

Page: 4 / 67

www.a-ts.cn A-TS Technology RT10

In this document, the following symbols may appear. The meaning they

represent is as follows.

Symbol

Instructions

DANGER

Attention, please! If there is improper operation, it may

cause serious consequences such as personal safety,

equipment safety or environmental safety.

WARNING

Be careful! If there is improper operation, it may cause

major accident, such as equipment damage or physical

injury.

ATTENTION

If there is misoperation, it may cause bad effects or cannot

be operated normally. Generally speaking, the issues

caused could be solved.

INSTRUCTIONS

It is widely used. It reminds the instructions and prompts.

EXAMPLE

For the better understanding of the users, to show a brief

example

NOTE

It offers small functions and tips unnoticeable that are very

convenient to use.

Summary of Contents for Pulse Series




































































Search results

Summary of Contents for Pulse Series

Reviews:

Related manuals for Pulse Series

Brands by name

Popular brands

A-TS TECHNOLOGY Pulse Series, User Manual

Search results

Summary of Contents for Pulse Series

Reviews:

Related manuals for Pulse Series

Brands by name

Popular brands