A-Link WNAP User Manual Download Page 53

Page: 53 / 102

USER’S MANUAL OF WNAP 3G MOBILE ROUTER

Version: 2.0

address assigned automatically from a PPTP server.

IP Address

If you select the PPTP support on WAN interface, fill in the IP

address for it.

Subnet Mask

If you select the PPTP support on WAN interface, fill in the subnet

mask for it.

Gateway

If you select the Static PPTP support on WAN interface, fill in the

gateway for WAN interface out going data packets.

Server IP Address

Enter the IP address of the PPTP Server.

Server Domain Name

Assign Domain Name and dispatch to PPTP servers. It is optional

field.

User Name

If you select the PPTP support on WAN interface, fill in the user

name and password to login the PPTP server.

Password

f you select the PPTP support on WAN interface, fill in the user

name and password to login the PPTP server.

MTU Size

Fill in the mtu size of MTU Size. The default value is 1460. Refer to

4.23 What is Maximum Transmission Unit (MTU) Size?

Request MPPE Encryption Click the checkbox to enable request MPPE encryption.

Attain DNS Automatically

Click to select getting DNS address for

PPTP

support. Please select

Set DNS Manually

if the

PPTP

support is selected.

Set DNS Manually

Click to select getting DNS address for

PPTP

support.

DNS 1

Fill in the IP address of Domain Name Server 1.

DNS 2

Fill in the IP address of Domain Name Server 2.

DNS 3

Fill in the IP address of Domain Name Server 3.

Clone MAC Address

Fill in the MAC address that is the MAC address to be cloned. Refer

to 4.24 What is Clone MAC Address?

Enable uPNP

Click the checkbox to enable uPNP function.

Refer to 4.22 What is Universal Plug and Play (uPNP)?

Enable IGMP Proxy

Click the checkbox to enable IGMP Proxy.

Enable Ping Access on

WAN

Click the checkbox to enable WAN ICMP response.

Enable Web Server Access

on WAN

Click the checkbox to enable web configuration from WAN side.

Enable FTP Server Access

on WAN

Click the checkbox to enable FTP Server Access on WAN

Enable IPsec pass through

on VPN connection

Click the checkbox to enable IPSec packet pass through

Summary of Contents for WNAP







































































































Search results

Summary of Contents for WNAP

Reviews:

Related manuals for WNAP

Brands by name

Popular brands

A-Link WNAP, User Manual

Search results

Summary of Contents for WNAP

Reviews:

Related manuals for WNAP

Brands by name

Popular brands