A-Link WNAP User Manual Download Page 32

Page: 32 / 102

USER’S MANUAL OF WNAP 3G MOBILE ROUTER

Version: 2.0

3.3.7

Wireless - Access Control

If you enable wireless access control, only those clients whose wireless MAC

addresses are in the access control list will be able to connect to your Access

Point. When this option is enabled, no wireless clients will be able to connect if

the list contains no entries.

Screen snapshot – Wireless Access Control

Item

Description

Wireless Access Control

Mode

Click the

Disabled

Allow Listed

Deny Listed

of drop down menu

choose wireless access control mode.

This is a security control function; only those clients registered in the

access control list can link to this WNAP 3G Mobile Router.

MAC Address

Fill in the MAC address of client to register this WNAP 3G Mobile

Router access capability.

Comment

Fill in the comment tag for the registered client.

Apply Changes

Click the

Apply Changes

button to register the client to new

configuration setting.

Reset Click

the

Reset

button to abort change and recover the previous

configuration setting.

Current Access Control List It shows the registered clients that are allowed to link to this Router.

Delete Selected

Click to delete the selected clients that will be access right removed

from this WNAP 3G Mobile Router.

Delete All

Click to delete all the registered clients from the access allowed list.

Reset Click

the

Reset

button to abort change and recover the previous

configuration setting.

Summary of Contents for WNAP







































































































Search results

Summary of Contents for WNAP

Reviews:

Related manuals for WNAP

Brands by name

Popular brands

A-Link WNAP, User Manual

Search results

Summary of Contents for WNAP

Reviews:

Related manuals for WNAP

Brands by name

Popular brands