USER’S MANUAL OF WNAP 3G MOBILE ROUTER
Version: 2.0
34
3.3.13
LAN Interface Setup
This page is used to configure the parameters for local area network that
connects to the LAN ports of your WNAP 3G Mobile Router. Here you may
change the setting for IP address, subnet mask, DHCP, etc.
Screen snapshot – LAN Interface Setup
Item
Description
IP Address
Fill in the IP address of LAN interfaces of this WLAN Access Point.
Subnet Mask
Fill in the subnet mask of LAN interfaces of this WLAN Access Point.
DHCP
Click to select
Disabled
,
Client
or
Server
in different operation mode of
wireless Access Point.
DHCP Client Range Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP address
from the range.
Show Client
Click to open the
Active DHCP Client Table
window that shows the active
clients with their assigned IP address, MAC address and time expired
information.
[Server mode only]
Static DHCP
Select enable or disable the Static DHCP function from pull-down menu.
[Server mode only]
Set Static DHCP
Manual setup Static DHCP IP address for specific MAC address.
[Server
mode only]
