QUICK WORKING INSTRUCTIONS
ENGLISH
SYSTEM ACTIVATION
SYSTEM DESACTIVATION
BY THE REMOTE CONTROL WITH ULTRASONIC SENSOR AND WINDOWS CLOSING:
1 time
Confirmation: 2
flashings 2 two-tone signals
WARNING:
3 flashings 3 two-tone signals
LED
immediately flashing
3 flashings 3 two-tone signals
fixedly
switched on, then blinking
2 times
Confirmation: 4 short flashings
4 two-tone signals
The cutting out is valid till the following activation.
1 time
2 times
Confirmation: long flashing
1 extended signal
WARNING:
SIR 050
SIR 050.NA
2
+15] ON
3
4
5
6
The alarm memory is repeated if the system is activated and desactivated without
turning the contact key on [+15 ON].
It's cancelled only by turning the contact key [+15] ON.
To simplify the use of the system, we always suggest the pairing of the electronic key
CHD 400 (allowing the system activation / desactivation without the remote control and
the vehicle start).
SIR 050 / SIR 050.NA SIREN
Press
the button of the remote control.
direction indicators
,
of the buzzer (with
optional siren), doors locking, windows closing, LED (red pilot lamp) lit fixed,
then flashing with active ultrasonic sensor.
,
, doors locking, windows closing,
indicate the activation without ultrasonic sensor
(definitive cuttingout).
,
, doors locking, windows closing,LED
mean the arming with buttons reading (doors,
bonnet, boot) and /or additional modules cut out.
Press
in fast sequence the button of the remote control.
of the direction indicators,
of the
buzzer, doors locking, LED immediately flashing.
Press
the button of the remote control or
in fast sequence (only for those cars
where the double manual control opens the driver's door first, and then the passengers' ones).
of the direction indicators,
of the buzzer,
doors opening, LED switched off (with closed doors; for some vehicles LED on).
The direction indicators can be connected to give the optical signals when the system alarms.
In some vehicles they can give also the “service signals” and the system “activation /
desactivation” signals in addition to the LED and the
or
buzzer (optional)
If any anomalies or alarms occurred, the first alarm is shown by some additional signalings
(BEEPS) of the siren and by some LED flashings:
Contact key [
.
Ultrasonic sensor (it detects all kind of intrusions in the vehicle).
Doors, bonnet, boot and additional modules .
Anti-tampering of the ultrasonic sensor (anti-blinding/anti-masking).
Self-diagnosis of the system.
The system is completed by the
equipped with the internal buzzer
to help in the use of the system, such as the activation/desactivation, the warning signalings, the
alarm memories, etc.
WITHOUT ULTRASONIC SENSOR AND WINDOWS CLOSING:
10
Summary of Contents for MED 6000 Series
Page 2: ......
