Polarstart PS-5500, Installation Manual

Page: 1 / 9

1
Table of Contents..………..……………..….1
What’s included……………………….…….2
Install points to remember…………………2
Features………………………………….….2
Options……………………………………....2
Programmable Features…….……………...2
Programming Transmitter……...………….3
Multi-Car Operation..………………. .. .….3
Remote starter & alarm Valet Mode.…….. 3
Enabling/Disabling Alarm Valet Mode…...3
Enabling Starter Valet Mode………………3
Disabling Starter Valet Mode………..…….3
Tach Adjustment……….………………….…..4
Manual Tach adjustment……….…….………4
Custom Programming Options…..….…….…4
Tach watch Lockout……………………..……5
Idle Mode………………………………….…..6
Diesel Engine.…………………….…………...6
Module Reset…………..……………….……..6
Programmable 5
th
relay……………………….6
Parking lights Flash Diagnostics……………...7
Harness Description……………………….….7
Harness Description (Cont)…..…..….……….8
Wiring Schematic………….…..…….….……..9
POLARSTART
PS-5500/5503/5504/5505/5514 SH
Automatic transmission remote starter & full-featured
alarm system
.
NOTICE:
DUE TO THE POTENTIAL FOR DAMAGE TO THE VEHICLE, THE MANUFACTURER IS NOT
RESPONSIBLE FOR ANY ELECTRICAL DAMAGE TO THE VEHICLE OR TO THE UNIT THAT HAS
CAUSED VEHICLE DAMAGE DUE TO IMPROPER INSTALLATION OF THE PRODUCT.
THIS UNIT MUST BE INSTALLED BY AN AUTHORIZED POLARSTART TRAINED TECHNICIAN
USING ALL SAFETY DEVICES SUPPLIED.
Please review the installation guide carefully before any work begins.
WARNING
THIS UNIT IS FOR AUTOMATIC TRANSMISSION ONLY, BEFORE INSTALLING THE
UNIT TEST THAT THE VEHICLE WILL NOT START IF THE GEAR SELECT LEVER IS
IN A DRIVE POSITION. IF IT STARTS IN GEAR, INSTALL A MANUAL TRANSMISSION
CAR STARTER.
Rev: 2.10 La – Dec/05/01 Manufactured in Canada by POLARSTART
INSTALLATION GUIDE
Table of Contents