Operating and Assembly Instructions Flexilo FLAT BOTTOM for wood pellets
Filling instructions (Provide these filling instructions to the filler)
Subject to technical change
Issue 09/2016
Page 29 of 32
©A.B.S. Silo- und Förderanlagen GmbH
8.2
Filling nozzle(s)
The standard A.B.S. silo for wood pellets comes
with one filling nozzle centered on the
narrow side of the silo.
The conveying air escapes through
the fabric cover on the top of the silo.
Thus, no exhaust system for the
conveying air is needed when
aerating the A.B.S. silo.
Filling nozzle centered on the narrow side of the silo
8.3
Filling with two filling nozzles
From a frame width of 2.5 m silos are equipped with a second filling nozzle.
In this case a better filling level will be reached.
Flexilo FLAT BOTTOM
for wood pellets with 2 filling sets
While filling with line 1 you can optionally exhaust with the second nozzle. In this case you
have to make sure that the fabric won´t get sucked into the filling line. Basically exhaustion is
not necessary.
If a second filling nozzle is installed there is no need for exhaustion. If
wished for it you can affect this process.
The exhaustion may only be effected under the following circumstances.
Otherwise the silo and the return air blower are endangered.
Filling Line II
Filling Line I
